GreenWorks G40HT61 Manual Del Operario página 6

EN
Problem
The machine
smokes during
operation.
The motor is on,
blades do not
move.
There is too
much noise
and/or vibration
during operation.
8 TECHNICAL DATA
Voltage
No load speed
Blade speed
Blade length
Cutting capacity
Weight (without battery pack)
Measuered sound pressure level
Guaranteed sound power level
Vibration
Uncertainty
Possible cause Solution
1. Immediately
stop the ma-
chine.
The machine 2. Remove the
has damage. battery pack.
3. Speak to
service cen-
ter.
Do not use the
The machine machine and
has damage. speak to service
center.
Remove battery
The blades are pack then clear
blocked. blockage from
the blades.
1. Stop the ma-
chine.
2. Remove the
battery.
The parts are
3. Inspect for
loosen.
damage.
4. Check and
tighten loose
parts.
Do not use the
The parts have machine and
damage. speak to service
center.
40V
3200
(±10%) /min
3200
(±10%) /min
610 mm
33 mm
2.7 kg
78.3 dB(A),
K
PA
97 dB(A)
≤2.5 m/s
1.5 m/s
English
9 WARRANTY
(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage) from
the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described in
the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Address: Propellergatan 1, 211 15 Malmö, Sweden
Name and address of the person authorised to compile
the technical file:
Name:
Address: Propellergatan 1, 211 15 Malmö, Sweden
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construc-
tion:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
=3 dB(A)
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
2
• 2011/65/EU & (EU)2015/863
2
Furthermore, we declare that the following parts,
clauses of European harmonised standards have been
used:
6
GLOBGRO AB
Globe Group Europe
Peter Söderström
Hedge Trimmer
22637T
See product rating label
See product rating label