inscabin W20B Manual Del Usuario página 7

lnstruction
Power ON/OFF
Use supplied AC adaptor (5V/1.2A) to connect the device with electrical socket to supply power.
Clock Radio Power ON/OFF
After connecting the power, Roxel Nod is powered on.
Long press the Mode/Standby button to enter Standby mode, then short press the Mode/Standby button to exit
Standby mode.
Long press the Mode/Standby button to enter Standby mode, then long press the Mode/Standby button again
to power off.
DAB Radio
1. Upon being powered on, the device will go to DAB mode automatically and will start searching for available
DAB stations, which will be stored after the search is completed. (If the device has already searched for
radio stations, you can also press and hold the Play/Pause button to perform automatic searching.)
2. Press the Prev/ Next button to select your desired DAB station(see small screen), then press the Play/Pause
button to play. Press the Vol-/Vol+ button to adjust volume.
3. Short press the Menu.Info button to view the current station information(see small screen): text information,
signal strength, program type, episode name, channel number/frequency, signal error rate, bit rate, time and
date, etc.
4. Saving stations into preset mode:
(1) Long press Play/Pause button ( if a full scan was previously done please move to step 2)
(2) Find the radio station by pressing the Prev/Next button.
(3) Select the channel you want to save, and press the Play/Pause button to enter.
(4) Press and hold the Preset button for 3 seconds.
(5) Pick one of the available (Empty) slots from the preset store screen(see small screen).
(6) Press the Play/Pause button to save the channel
5. Short press the Preset button to recall preset radio list. Press the Prev/ Next button to select DAB station,
then press the Play/Pause button to play.
Note: Please press the Preset button to access your preset radio stations in DAB mode, otherwise the stations
will display in automatically set order.
FM Radio
1. Press the Mode/Standby button to switch to FM mode.
2. Press and hold the Play/Pause button for 2~3 seconds to start automatic searching for FM radio channels.
Available channels will be stored after the search is completed.
Scan Setting: Press and hold the Menu.Info button for 2~3 seconds to enter menu set up(see small screen).
Press the Prev/Next button to select "Scan Setting", press the Play/Pause button to confirm and enter. Press
the Prev/Next button to select All stations / Strong stations, and press the Play/Pause button to confirm. If
select All stations, all available channels will be stored after the search is completed. If select Strong stations,
only strong signal radio stations will be stored after the search is completed.
3. Press the Preset button to go to the Radio station list, then press the Prev/Next button to select the desired
station and press the Play/Pause button to play. Press the Vol-/Vol+ button to adjust volume.
4. Short press the Prev/Next button to adjust radio frequency by 0.05MHz at a time.
Long press the Prev/Next button for 3 seconds to start automatic searching for previous/next radio station.
5. Long press the Preset button to add current radio station to the radio list, press the Prev/Next button to
select list number you want to use, then press the Play/Pause button to confirm.
07
English