Publicidad
Idiomas disponibles
Idiomas disponibles
Initial use
Q
Unpacking
Q
WARNING!
The product and the packaging are not
u
children's toys! Children must not play with
plastic bags, sheets and small parts! There is
a danger of choking and suffocation!
1.
Unpack all parts and lay them on a flat,
stable surface.
2.
Remove all packing materials and shipping
devices if applicable.
3.
Make sure the delivery contents are complete
and free of any damage. If you find that
parts are missing or show damage do not
use the product but contact your dealer. Do
not use the product unless missing parts have
been delivered in addition or defective parts
have been replaced. Using an incomplete
or damaged product represents a hazard to
people and property.
4.
Ensure that you have all the accessories and
tools needed for assembly and operation.
This also includes suitable personal protective
equipment.
Accessories
Q
To operate this product safely and correctly, the
following accessories, i. e. tools and attachments,
are necessary:
Saw blade
o
Ensure that you have the accessories and
tools needed for commissioning and operation
available. This also includes suitable personal
protective equipment.
Accessories and tools are available through your
authorised dealer. When buying always consider
the technical requirements of this product
(see "Technical data").
If you are not certain, ask a qualified specialist and
get advice from your trusted dealer.
NOTE
This instruction manual contains information
u
and suggestions for several attachments and
their uses. The attachments depicted are not
necessarily included in the shipment, but are
meant to indicate additional possibilities for
using this product.
30 GB / IE
Before use
Q
Attaching / removing the
Q
battery pack
Attaching the battery pack:
1.
Align the battery pack
slide it onto it. Ensure it clicks noticeably in
place.
Removing the battery pack:
1.
Press the release button
battery pack
.
4
Charging the battery pack
Q
NOTE
The battery pack
4
u
Always pull out the plug of the charger
u
from the mains before removing or connecting
the battery pack
4
Never charge the battery pack 4 when the
u
ambient temperature is below 10 °C or
above 40 °C.
Rest the charger
24
u
between successive charging sessions.
If no battery pack
u
charger
and the charger is connected to
24
mains, the charging status LED
green.
1.
Connect the battery pack
charger
24
.
2.
Insert the mains plug into the socket. The
charging status LED
the battery pack
4
the green charging status LED
that the charging process is complete.
3.
Disconnect the charger
and remove the battery pack
charger.
4.
Attach the battery pack
product.
to the handle and
4
and remove the
22
comes partly charged.
24
to the charger.
for at least 15 minutes
is inserted into the
4
lights up
25
to the battery
4
lights up red. Once
26
is completely charged,
indicates
25
from the mains
24
from the
4
back to the
4
Publicidad
