Publicidad
Idiomas disponibles
Idiomas disponibles
1 - SAFETY WARNINGS
ATTENTION !
ORIGINAL INSTRUCTIONS - important safety in-
structions. Follow the instructions since incorrect instal-
lation can lead to severe inquiry! Save these instructions.
Read the instructions carefully before proceeding with instal-
lation.
The design and manufacture of the devices making up
the product and the information in this manual are com-
pliant with current safety standards. However, incorrect
installation or programming may cause serious injury to
those working on or using the system. Compliance with
the instructions provided here when installing the pro-
duct is therefore extremely important.
If in any doubt regarding installation, do not proceed and con-
tact the Key Automation Technical Service for clarifications.
Never make modifications to any part of the automation system
other than those specified in this manual. Operations of this
type can only lead to malfunctions. The manufacturer declines
all liability for damage caused by unauthorised modifications
to products.
Do not allow parts of the automation system to be immersed in
water or other liquids. During installation ensure that no liquids
are able to enter the various devices.
2 - INTRODUCING THE PRODUCT
2.1 - Description of the product
This product is a buffer battery designed for use in automations for gates and garage doors using control units. The battery supplies emergency
power to an automation in the event of a sudden power failure.
P2
F1
P1
Never place automation system components near to sources
of heat or expose them to naked lights. This may damage
system components and cause malfunctions, fire or hazards.
In the event of periods of disuse, disconnect it from the
automation and store in a dry location to avoid the risk of leaks
of harmful substances.
Any use other than as described herein is to be considered
improper and is strictly prohibited!
Before proceeding with battery installation, check the condition
of the product components and suitability of the selected
model with reference to the product technical specifications.
ATTENZIONE !
Disconnect the system from the power mains before
installing and connecting the battery. All product
installation, connection, testing, commissioning and
maintenance operations must be performed exclusively
by a qualified technician. If the disconnect device is not in
a visible location, affix a notice stating: "MAINTENANCE
IN PROGRESS".
The automation system component packaging material
must be disposed of in full observance of current local waste
disposal legislation.
TECHNICAL SPECIFICATIONS
Current
Battery capacity
Complete recharge time
Operating temperature
Use in particularly acid, saline or explo-
sive atmospheres
D7
D6
Assembly and connections
Degree of protection
Control unit dimensions (L - P - H)
Battery dimensions (L - P - H)
Weight
EN
KBPN
3.9A
1300 mAh
12 h
-20°C + 55°C
NO
Insertion in specific
compartments
-
95 x 45 x 15 mm
130 x 100 x 14 mm
470 g
Publicidad
