Samsung 5+ Serie Manual Del Usuario página 7

Battery Low Alarm
If the battery becomes and blanks low while using the Smart Touch Control, the following alarm window blinks and appears
at the bottom left of the screen. If the alarm window pops up, replace the batteries of the Smart Touch Control. Use alkaline
batteries for longer usage.
Inserting the Batteries (AAA X 2)
1. Slightly lift the battery cover by pulling the strap or using a plastic card. Next, pull on the cover's notch with a
fingernail to remove the cover completely.
2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
3. Align the battery cover with the back of the remote control and press down along the edges until it is cleanly
attached to the remote control.
Using the Touchpad
Use the touchpad to perform various commands. Navigate to Tutorial (System > Device Manager >
Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.
Dragging
Drag on the touchpad in the desired direction. Move the
focus or the pointer in the direction the finger is dragging.
Changing Channels by Entering Numbers
While watching TV, tap on the protruding line on the left or right edge of the touchpad to bring up
the numerical input window on the screen. Use your finger to enter the number for the channel
you want to watch. The recognised number is displayed on the screen and the TV switches to the
corresponding channel. However, the number you have entered may not be recognised properly by
the TV. Refer to the guide below to ensure that your numerical entries are recognised accurately.
Numerical Input Guide
Refer to the diagrams below when entering numerical values. The TV may not recognise your entries if you do not follow
the sequences shown below.
2
1
English - 7
3
Tap
Press the touchpad. This selects the focused item.