Publicidad
Idiomas disponibles
Idiomas disponibles
Fax +32 2 359 95 50
a safety, which prevents the pouring jar from working if it is not
assembled correctly.
16. The appliance is designed for the preparation of small quantities
of food, which have to be consumed rather quickly. It is not
designed for the preparation of large quantities at once.
17. Keep hands and utensils out of container while blending to
reduce the risk of severe personal injury and/or damage to
blender. A rubber spatula may be used but must be used only
when blender is not running.
18. Do not use a broken, chipped or cracked blender jar.
19. To reduce the risk of injury, never place the cutting unit blades on
base without jar properly attached.
20. Blades are sharp, handle with care.
21. Always operate the blender with cover in place.
22. Always close the jar with the lid before starting mixing. When
mixing hot liquid, do not fill more than 2/3 of the jar and be very
careful in order to avoid splashing of hot liquid, otherwise you can
get burned. Do not forget to close the feeding hole of the
pouring jar with the cap.
23. Screw on blade assembly firmly. Injury can result if moving blades
accidentally become exposed.
24. Do not leave blender unattended while it is operating.
25. To disconnect cord, turn the speed selector to "0" , then remove
the plug from wall outlet.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
POLARIZED PLUG INSTRUCTIONS
Some appliances are equipped with a polarized plug (one blade is
wider than the other). To reduce the risk of electric shock, this plug
will fit into the polarized outlet only one way. If the plug does not
properly fit into the outlet at first, reverse it. If it still does not fit,
contact a competent qualified electrician. Do not attempt to modify
the plug in any way.
Copies of the I/B. Please reproduce them without any
changes
except
under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame,
3
Assembly page 3/24
special
instruction
from
Team
Print only
USK BL 16909/16911 - 110127
Publicidad
