Step 1
å
Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å
Fasten three BRACKETS (8) to the LEFT END (C) exactly
as shown. Use three 1/2" PAN HEAD SCREWS (20).
å
NOTE: Be sure the BRACKETS are even with the edge of
the LEFT END.
å
Turn two CAM SCREWS (5) into the LEFT END (C).
5
427849
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
C
www.sauder.com/service
1
20
1/2" PAN HEAD SCREW
(3 used in this step)
8
Page 7