Rumble Tuff EZ Express Manual Del Usuario página 17

4
5
6
4. Start-up Procedure and Operation
Place the Diaphragm in the Cup of the
Breastshield Body.
Place the Cap on the Cup and
Diaphragm.
Connect the Tubing to the Tubing
Connector located on the Cap.
Note: Make sure there is no moisture in the
Tubing.
Note: Do not reverse the order of steps 4
through 5. Doing so will result in suction
loss when pumping.
Press around
the edges of the
Diaphragm for a
secure fit.
Align the hinge
cover over the hinge.
Press tightly on the
cap to seal.
15