Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
Please read and understand this entire manual prior to assembling the product.
1. Do not allow children to climb or play in or around this product.
2. Use this unit for its intended purpose only. Do not use shelves as step ladder.
3. To avoid damage, assemble the product on a sturdy, level and protective surface.
4. Make sure all bolts/screws are tightly fastened before the unit is used.
5. Check bolts/screws periodically and tighten them if necessary.
6. Unit must be permanently fastened to the wall with provided hardware;
this storage unit is not designed or intended for freestanding use.
WARNING
UNIT IS INTENDED FOR USE ONLY WITH MAXIMUM WEIGHTS INDICATED.
OVERLOADING STORAGE UNIT WITH PRODUCTS HEAVIER THAN MAXIMUM
WEIGHT MAY RESULT IN INJURY. DISTRIBUTE ANY WEIGHT IN UNITS EVENLY.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 50 minutes
Tools Required for Assembly (not included): Rubber Mallet, Phillips screwdriver.
MAXIMUM LOAD: 30 LBS.(13.6KG)
5
ASSEMBLY INSTRUCTIONS
1. Attach drawer left (I) and drawer right (J) to drawer
back (H) using M4 x 38 mm screws (KK).
Hardware Used
KK
M4 x 38 mm Screw
2. Insert drawer bottom (K) into drawer left (I), drawer
right (J) and drawer back (H).
3. Insert cam bolts (BB) into drawer front (L).
Attach a handle (QQ) to the front side of drawer (L) using
the 5/32" x 25 mm bolts (PP) provided.
Hardware Used
BB
Cam Bolt
PP
5/32" x 25 mm Bolt
QQ
Handle
1
H
x 16
I
2
H
I
K
3
QQ
L
x 16
x 8
x 4
BB
6
KK
J
x 4
J
x 4
PP
x 4
Publicidad
