Publicidad
Idiomas disponibles
Idiomas disponibles
Warning
• Keep the workplace clean and tidy, disorganized and poorly lit places can cause accidents. Be prudent, before starting
work consider all the requirements to carry out your work. Do not operate the welder when you are tired or under the
influence of medication, alcohol and / or drugs.
• Professional training is required to operate the machine.
• The welding machine is not suitable for use in rain or snow.
• Use labor protection welding supplies authorized by the Department of Homeland Security.
• The operator must be qualified personnel with a valid operation certificate of "metal welding operations".
• Turn off the power before performing maintenance.
• Only qualified personnel by UJUETA MÉXICO, S.A. DE C.V., can repair the welder.
Uncovering and handling the machine can lead to serious risks. Seek help from the nearest Authorized Service Center if you
find fault with equipment operation.
• Be sure to consider the special requirements for working in spaces with risk of fire or explosion.
• Never weld bicycle frames or ratchets, parts of vehicle steering, trailer tow bars, etc.
• Make sure the machine is adequately ventilated, do not locate it too close to walls with a minimum separation of 10 cm.
Do not rest the machine on the vents. Do not place the machine in a lateral and horizontal position. The welder is not
designed to be mounted on racks or on trolleys. Placing the welder at inclinations greater than 10 ° from the horizontal may
result in its overturning.
• Electronic devices near electronic welding machines can experience interference due to the high levels of current produced
during the process. Turn off nearby computer equipment as a precaution. If interference occurs outside of the immediate
area where the process is taking place, have a qualified electrical technician check the grounding of the electrical connection
used to operate the machine.
• The welding process can affect medical devices such as pacemakers. If you are a user of these devices stay away and
consult your doctor.
• Never use the machine for other activities or operations other than welding.
• Moving parts, such as fans, can cause personal injury. Stay away from them and do not insert objects on them or obstruct
them.
• Do not move the gas cylinder when the regulator valve is in place. Attach the gas cylinder securely, upright to a wall rack
or special cart.
• Always close the gas cylinder valve and then the regulator valve.
• Additional safety considerations are required when working under any of the following hazardous conditions: In wet
locations; metal structures such as floors, grates, or scaffolding; being in difficult positions such as sitting, kneeling or lying
down, when there is a high risk of accidental contact with the workpiece, when the work area has flammable materials, when
welding at height.
KEEP WORKiNG
KEEP WORKiNG
Keep Working
S i
6 1 3 0
S i
7 1 7 5
04
X P S i
7 1 6 0
X P
X P S i
7 2 0 0
X P
Publicidad
