Operation; Before Initial Use; Energy Saving Tips - Dometic GROUP Waeco CoolFreeze CDF 11 Instrucciones De Uso

Operation

6 Operation
The device is equipped with an interior LED light which remains on whenever
power is connected. The power consumption of this LED light is extremely
low and insignificant compared to the overall power consumption of the de-
vice.
6.1

Before initial use

I
NOTE
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter "Cleaning and mainte-
nance" on page 34).
6.2

Energy saving tips

 Choose a well ventilated installation location which is protected against di-
rect sunlight.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the lid open for longer than necessary.
 Defrost the cooler once a layer of ice forms.
 Avoid unnecessary low temperatures.
6.3 Locking the cooler
➤ Close the lid.
➤ Press the lock (fig. 1 7, page 3) down until it snaps in audibly.
6.4 Connecting to a cigarette lighter
I
NOTE
If you connect the device to the cigarette lighter of your vehicle,
remember that the ignition must be turned on to supply the device
with power.
28
CoolFreeze CDF11
EN