Hilti SID 2-A Manual De Instrucciones Original página 25

lead to disorders of the blood vessels and nervous system in the fingers,
hands and wrists.
Electrical safety
▶ Before beginning work, check the working area for concealed electric
cables or gas and water pipes. External metal parts of the power tool may
give you an electric shock if you damage an electric cable accidentally.
Power tool use and care
▶ Immediately switch off the power tool if the accessory tool jams. The
power tool might twist off-line.
▶ Wait until the power tool stops completely before you lay it down.
2.4 Battery use and care
▶ Observe the special regulations and instructions applicable to the trans-
port, storage and use of Li-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them
to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the
product in a non-flammable location, well away from flammable materials,
where it can be kept under observation and allowed to cool down. In this
case, always contact your Hilti Service.
3 Description
3.1 Product overview
Forward / reverse switch
@
Grip
;
Light
=
Belt hook (optional)
%
3.2 Intended use
The product described is a hand-held cordless impact screwdriver. It is
designed for tightening and releasing nuts, bolts, anchors and wood screws.
• Use only Hilti Li-ion batteries of the B 12 series with this product.
• Use only Hilti-approved battery chargers to charge these batteries. More
information is available from your Hilti Store or from: www.hilti.group
*2081236*
Printed: 10.07.2019 | Doc-Nr: PUB / 5206085 / 000 / 04
1
&
(
)
+
2081236
Battery state of charge indica-
tor
Battery release button
Control switch
Hex. socket (SID)
English 21