Danby DPA100B9IWDB-6 Manual De Conexión página 6

OPERATING INSTRUCTIONS
Plug in and power on the appliance.
If you are using an Android phone, you may have
to choose the connection method. Press "Manual
Setup". This will not be necessary on iOS.
9:41
Scan QR code on the unit
Note:Wait 5-10 seconds while your device is in
AP mode before scanning the QR code.
Choose Method
Manual Setup
If the display does not automatically show "AP",
press and hold the "Swing" button for 3 seconds
until "AP" shows on the display.
Go to the WLAN settings in your wireless device.
Connect to the network "net_ac_XXXX" using
password "12345678". This will connect your
wireless device to the appliance.
6