Descargar Imprimir esta página

NUTRIBULLET NB-101S Guia Del Usuario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

FRICTION FROM THE
ROTATING EXTRACTOR
BLADES WHEN BLENDING
CAN CAUSE INGREDIENTS
TO HEAT AND GENERATE
INTERNAL PRESSURE IN THE
SEALED CUP, IF PERMITTED
TO RUN FOR LONGER THAN A
MINUTE. IF THE CUP IS WARM
TO TOUCH ALLOW IT TO
COOL COMPLETELY BEFORE
CAREFULLY OPENING,
POINTED AWAY FROM YOUR
BODY TO AVOID INJURY.
• After blending, allow the
contents to settle and
release any pressure that
may have built up during
the extraction process
by slowly unscrewing
the container from the
blade assembly. Have the
container pointed away
from you in case there is
any built-up pressure.
• If you need to blend for
longer than one minute,
blend for 1-minute
intervals. After the initial
and each subsequent
1-minute blending cycle,
allow the Motor Base
to shut off completely
and wait at least one
minute before starting
another cycle.
4
• Do not run for more than
3 consecutive 1-minute
intervals to prevent the
contents from overheating.
Allow contents to settle for
2-3 minutes after the third
extraction cycle to prevent
overheating and buildup
of pressure.
• DO NOT ALLOW BLENDED
MIXTURES TO SIT IN
A SEALED CONTAINER
FOR LONG PERIODS OF
TIME!
Sugar in fruits and
vegetables can ferment
over time, releasing gases
and causing pressure
to build up in a sealed
nutribullet
Cup. If you will
®
not consume your smoothie
immediately, remove the
blade, cover the container
with a lid or plastic wrap,
and refrigerate. Never store
any blended mixture in a
sealed nutribullet
Cup
®
either unrefrigerated or for
any prolonged period of
time; contents will spoil and
ferment.
EXTRACTOR BL ADE
SAFETY
Never store any Extractor
Blade in the Motor Base
unattached to a nutribullet
®
Cup. An exposed blade can
present a laceration hazard.
BLADES ARE SHARP!
HANDLE CAREFULLY.
Use
care when handling any
blade. To avoid laceration
injury, do not handle or
touch any blade edge.
AVOID CONTACT WITH
MOVING PARTS!
Keep
hands and utensils out
of and away from the
Extractor Blade while
blending food to reduce
the risk of severe personal
injury.
• To prevent leakage and
the possible separation
of components during
operation, properly align
and securely attach (hand
tighten) the blade to a
nutribullet
Cup, and check
®
for leakage before placing
it on the Motor Base and
operating your nutribullet
®
• Once you have stopped
your nutribullet
, wait
®
until the motor comes to a
complete stop and the unit
powers down completely
before removing the cup/
Extractor Blade from the
Motor Base. Taking the
container off the unit prior
to complete power down
can cause damage to the
Extractor Blade coupling or
motor gear.
NEVER BLEND WITHOUT
LIQUID AS DOING SO MAY
DAMAGE THE EXTRACTOR
BLADE OR MOTOR.
• The cyclonic action
of
®
your nutribullet
requires
®
the use of liquids to make
smoothies and other
nutritious beverages. The
nutribullet
is not intended
®
to be used as an ice
crusher or without liquids.
Always add liquid to your
smoothie.
DO NOT USE
the Extractor
Blade for grinding dry
ingredients such as grains,
cereal, or coffee, as this
may damage the motor
and/or the Extractor Blade.
• We recommend replacing
your Extractor Blade every
6 months (depending
.
on use) or as needed for
optimal performance.
• Certain configurations may
contain a milling blade.
This blade can be used for
milling herbs, spices, grains
and seeds.
5

Publicidad

loading