Publicidad
Idiomas disponibles
Idiomas disponibles
Wear respiratory protection.
Cutting hazard!
Wear cut-resistant work gloves.
Protection class II (Double insulation)
Electrical devices do not belong in
domestic waste.
Caution! Do not stare into the bright
light!
Ø 104 mm
Grinding disc dimensions
Ø 22 mm
Additional graphical symbols on
the grinding disc
Never use faulty grinding discs
Symbols used in the
instructions
Hazard symbol with infor-
mation on the prevention of
personal injury or property
damage
Hazard symbol (the hazard is ex-
plained instead of the exclamation
mark) with information on damage
prevention
Advisory symbol with information
on how to best use the device
Wear protective gloves
Connect the device to the power
supply.
Remove the mains plug
General Safety Directions for
Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fi re and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of fl ammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
fi ed plugs and matching outlets will
reduce risk of electric shock.
GB
MT
23
Publicidad
