Fanimation PROP LP8333LBL Manual Del Usuario página 13

How to Install Your Canopy Housing
NOTE: This step is applicable after the necessary
wiring is completed.
1. Assemble canopy by rotating key slot in canopy
over shoulder screw in hanger bracket, taking care not
to pinch the wires. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that was
previously removed. (Figure 1)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and
the ceiling.
2. Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket
utilizing the key slot twist-lock feature. (Figure 2)
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
your light kit.
1. Connect the 2 pin connectors from the light kit
assembly to the 2 pin connectors from the motor
assembly. (Figure 1)
How to Assemble Your Light Kit
Shoulder Screw
Motor Assembly
Light Kit Assembly
13
Ceiling
Canopy
Figure 1
Canopy Screw
Cover
Figure 2
Figure 1