iRobot Roomba Combo j9 Plus Manual Del Usuario página 8

Cleaning
EN
• Cleaning pattern: Your robot will automatically explore and clean your home in
neat rows, avoiding obstacles by using its front-facing camera. It will return to the
Charging Station at the end of a cleaning job and whenever it needs to recharge
or empty the bin.
Your robot is able to recognise and avoid objects. However, it is
still recommended to remove excess obstacles before cleaning.
• When your robot detects an especially dirty area, it will engage Dirt Detect™
mode, moving in a forwards/backwards motion to clean the area more
thoroughly. The light ring indicator will flash blue.
4 For more information, visit global.irobot.com
Press the cleaning button on your
Roomba Combo® Robot Vacuum & Mop
Tap to Start/Pause/Resume
Hold for 2–5 seconds to end a job
Press the New Job button on your Clean
Base™ Auto-Fill Dock to start a job
• To end a job and send the robot back to its Charging Station, hold the cleaning
button down for 2–5 seconds. A blue light ring pattern will indicate that the
robot is seeking the Charging Station.
When your robot senses that its bin needs
to be emptied, the light ring indicator
will illuminate in a red sweeping motion
towards the rear.
Vacuuming
• While cleaning, your robot will automatically return to the Clean Base to empty
its bin and recharge as needed.
• The Clean Base's Error LED Indicator will turn solid red when a new
bag is needed.
STARTING A VACUUM-ONLY CLEANING JOB FROM YOUR
CLEAN BASE® Auto-Fill Dock
• Empty the robot tank and detach the mopping pad before starting a
vacuum job. Return the robot to the Auto-Fill Dock and press the New Job
button.
Note:
If you place your robot on the Clean Base by hand, it will not empty the Dust
Bin or fill the water tank automatically. In this case, use the iRobot Home App or
hold the New Job button down for 2–5 seconds.
STARTING A VACCUM-ONLY CLEANING JOB FROM YOUR ROBOT
• Empty the robot tank and detach the mopping pad before starting a
vacuum job. Place on the floor and press the cleaning button on the
robot.