iRobot Roomba j9 Manual Del Usuario página 6

Cleaning
EN
• Your robot will automatically explore and clean your home. It will return to
the charging station at the end of a cleaning job and whenever it needs to
recharge.
Remove excess clutter from floors before cleaning. Use your
robot frequently to maintain well-conditioned floors.
• To end a job and send the robot back to its charging station, hold the clean
button down for 2-5 seconds. A blue light ring pattern will indicate that the
robot is seeking the charging station.
• When your robot detects an especially dirty area, it will engage Dirt Detect™
mode, moving in a forward/backward motion to clean the area more
thoroughly. The light ring indicator will flash blue.
3 For more information, visit global.irobot.com
Just press the clean button
Tap to Start/Pause/Resume
Hold for 2-5 seconds to end a job
When the robot senses its bin needs to be
emptied, the light ring indicator will illuminate
in a red sweeping motion toward the rear.
Troubleshooting
• Your robot will tell you something is wrong by playing an audio alert and
turning the light ring indicator red. Press the clean button or tap the bumper
for details. Check the iRobot Home App for further support.
Red Light Ring
Low battery. Please charge.
• After 90 minutes of inactivity off the charging station, the robot will
automatically end its cleaning job.
• To factory reset your robot, remove the dust bin and hold the clean button
down for seven (7) seconds. A sound will let you know when the factory reset
has been completed. Press the clean button down once more to confirm.
Battery Safety & Shipping
For best results, only use the iRobot Lithium Ion Battery that comes with your robot.
WARNING: Lithium ion batteries and products that contain lithium ion
batteries are subject to stringent transportation regulations. If you need to
ship this product for service, travel or any other reason, you MUST follow the
below shipping instructions.
• Battery MUST be turned off before shipping.
• Turn off the battery by removing the robot from the charging station
and holding down the clean button for 3 seconds with one wheel off the
ground. All indicators will turn off.
• Package the robot securely for shipping.
• If you need further assistance, contact our Customer Care team or visit
global.irobot.com.