Makita DJV182 Manual De Instrucciones página 9

Cover plate
► 1 . Cover plate 2. Base
Use the cover plate when cutting decorative veneers,
plastics, etc. It protects sensitive or delicate surfaces
from damage. Fit it on the back of the tool base.
Anti-splintering device
► 1 . Anti-splintering device 2. Base
For splinter-free cuts, the anti-splintering device can
be used. To install the anti-splintering device, move the
tool base all the way forward and fit it from the back
of tool base. When you use the cover plate, install the
anti-splintering device onto the cover plate.
CAUTION:
• The anti-splintering device cannot be used when
making bevel cuts.
1
2
2
1
Dust extraction
The dust nozzle (optional accessory) is recommended
to perform clean cutting operations.
► 1 . Dust nozzle 2. Base
To attach the dust nozzle on the tool, insert the hook of
dust nozzle into the hole in the base.
1
► 1 . Clamp screw
To secure the dust nozzle, tighten the clamp screw at
the front of the dust nozzle.
The dust nozzle can be installed on either left or right
side of the base.
1
► 1 . Dust nozzle 2. Hose for vacuum cleaner
Then connect a Makita vacuum cleaner to the dust
nozzle.
9 ENGLISH
1
2
2