FEIDER Machines FG1600i Manual De Instrucciones página 27

PRE-OPERATION CHECK
CHECK ENGINE OIL
Note: Running the generator with insufficient engine oil can cause serious engine damage.
Engine oil should be replaced during regular maintenance or when the oil level is below the end of the
dipstick.
1. Put spark-plug side face up and control panel face down, vertically lay-down the generator on even
surface, unscrew oil cap (FIG. 1).
ATTENTION!
Before checking or replacing oil, make sure the engine is fully stopped and the generator is situated on a
stable and level surface.
2. Add oil (oil type: 15W/40 SE) 260 ml (FIG. 2) , close oil cap and clean it with a rag, then put the
generator back to the stand-up position.
Oil Filler Cap
Oil sensor
Oil filler port
FIG. 1
FIG. 2