EGO PSA1000 Manual Del Usuario página 14

ASSEMBLY
WARNING:
until the parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
recommended for use with this pole saw. Any such alteration or modification is misuse
and could result in a hazardous condition leading to possibly serious personal injury.
UNPACKING
◾
This product requires assembly.
◾
Carefully remove the product and any accessories from the box. Make sure that
all items listed in the packing list are included.
◾
Inspect the tool carefully to make sure that no breakage or damage occurred
during shipping
◾
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
◾
If any parts are damaged or missing, please return the product to the place of
purchase.
ASSEMBLING THE BAR AND
CHAIN
1. Remove the battery pack.
2. Position the pole saw attachment
on its side on a firm, flat surface,
so that the chain-sprocket cover is
facing upwards (Fig. 2).
3. Wear gloves. Using the dual-head
wrench provided, loosen the
coverscrew assembly and remove it
from the chain-sprocket cover.
4. Remove the chain-sprocket cover
from the pole saw attachment.
5. Lay the new saw chain in a loop on
a flat surface and straighten any
kinks (Fig. 3).
14
POLE SAW ATTACHMENT — PSA1000/PSA1000-FC/PSA1020/PSA1020-FC
If any parts are damaged or missing, do not operate this product
Do not attempt to modify this product or create accessories not
2
Chain-sprocket Cover
3
Cover-screw