Technical Data; Before Starting The Equipment - EINHELL GC-ET 2522 Manual De Instrucciones

The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage ......................... 230-240 V ~ 50 Hz
Power ........................................................ 250 W
Cutting circle ............................... Diameter 22 cm
Revolutions n .................................... 12000 rpm
0
Cutting line diameter ............................... 1.2 mm
Weight ......................................................1.25 kg
Sound and vibration
L sound pressure level ..................... 81.3 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ....................... 94.4 dB(A)
WA
K uncertainty ........................................ 2.03 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Vibration emission value a
K uncertainty = 1.5 m/s
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
Anl_GC_ET_2522_SPK7.indb 17 Anl_GC_ET_2522_SPK7.indb 17
= 6.53 m/s
2
h
2
- 17 -
GB
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Always pull the power plug before making
adjustments to the equipment.
5.1 Assembling the grass trimmer
(Fig. 3a to 5b)
•
Slot the top handlebar (Fig. 3a/Item 5), middle
handlebar (Fig. 3a/Item 11) and bottom hand-
lebar (Fig. 3a/Item 6) together in the direction
of the arrow. Secure the handlebar parts with
the screw (Fig. 3b/Item 10).
•
Plug the guard hood with screw (Fig. 4/Item
7) onto the motor head and turn it counter-
clockwise as far as it will go
•
Fasten the guard hood with the screw (Fig. 5/
Item 8).
25.08.2016 07:25:04 25.08.2016 07:25:04