Stage 2: Toddler; Safety Harness - Mima xari Manual Del Usuario

10
17
20
17. Remove carrycot
Press the two buttons on both sides of the carrycot and
lift it off.
18. Adjust height of carrycot
• There are two height positions for the carrycot.
Press the height adjustment buttons on both sides of the
chassis and move the carrycot up or down.
19. Collapse carrycot
18
Remove the mattress and the safety bar. Release the
sideflaps from the carrycot frame. Open the seat and
position the collapsed carrycot inside the seat. Align the
angle adjustment lever with the hole in the rear shell of
the seat. Make sure the seat brackets are clear of the
seat.

STAGE 2: TODDLER

19

SAFETY HARNESS

• Whenever a child is placed in the seat, ensure that the
safety harness is correctly fitted.
• The shoulder straps can be set at two different height
positions. Choose the position closest to the top of the
child´s shoulders.
20. Set up harness
21 Take each harness attachment and slide off the bottom
section. Push the harness attachment through its
corresponding hole in the seat pad and the seat. Zip the
seat open and slide the bottom part onto the harness
attachment from the inside of the seat until it clicks into
place.
21. Buckle up
Push the shoulder strap buckles into the buckle slot until
it clicks. Pull the loose ends on the shoulder straps to fit
the harness snugly around the child.