Fronius Smart Meter 240V-3 UL Manual De Instrucciones página 21

Example 1:
Example 2:
Multi meter sys- If several Fronius Smart Meters are installed, a separate address must be set for
tem - Fronius each one (see
GEN24 inverter primary meter always receives the address 1. All other meters are numbered
consecutively in the address range from 2 to 14. Different Fronius Smart Meter
power categories can be used together.
IMPORTANT!
Use no more than Use 7 secondary meters in the system. To avoid interference, it
is recommended to install the terminating resistors according to the chapter
minating Resistors
Input Battery
Input Battery
Set the address of the Fronius Smart Meter
on page 16.
Number
Fronius
of primary
Ohmpilot
meters
0
0
0
1
Number
Fronius
of primary
Ohmpilot
meters
1
0
0
0
Number
of secondary
meters
4
2
1
3
Number
of secondary
meters
3
4
2
1
on page 15). The
Ter-
21