Collomix Xo1 Manual De Servicio página 5

Machine-specific safety instructions

WARNING
: Read all notes and instruc-
tions on safety. Failure to observe any of the
notes and instructions on safety may result in an
electric shock, fire and/or serious injury.
Make sure that you keep all notes and
instructions on safety for future reference.
To be able to use the machine safely it is essen-
tial that you read the operating instructions and
the safety instructions thoroughly and comply
with all of them. The machine is to be used
only by persons who have read the operating
instructions and who are acquainted with the
occupational safety and accident prevention
regulations in force in your country.

In addition, you must also comply with the
general safety instructions also included with
the machine.
►Take care to ensure that the mains power
supply corresponds to the specifications on the
rating plate.
►Do not use the device in any environments
with potentially explosive atmospheres. Do
not mix any readily flammable solvents or solvent-
containing substances with a flash point of below
21° C / 69° F.
►Take care to ensure that no liquid splashes
against the motor housing and keep it away from
the rain – risk of electric shock!
►Never clean the machine with water – risk of
electric shock!
►Do not wind cables or leads around any parts
of your body.
►Do not use the machine with a damaged
cable. Do not touch the cable and pull out the
power plug immediately. There is an increased
risk of electric shock from damaged cables. If the
mains power cable has to be replaced (because of
damage or similar), ensure that it is replaced by the
manufacturer or an authorized representative of the
manufacturer (electrician) in order to avoid any risk
to safety.
►Always hold the machine firmly with both
hands when carrying out your work and make
sure you have a secure footing.
►Hold the machine by the insulated grip
surfaces, when performing an operation where
the plug-in tool may contact hidden wiring or it's
own cord. Plug-in tools contacting a "live" wire may
make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
►Before starting up, check that the mixing rod
is securely attached and rotates without a hitch.
►Start up and run down the machine in the
mixing container only.
container is stood in a firm and secure position.
►Do not reach into the mixing container with
your hands or insert any other objects into it
while mixing is in progress. Risk of crushing!
►Wait until the machine or tool comes to a
complete standstill. Rotating tools can snag and
cause injuries or damage.
►If the sound pressure level should exceed 85
dB (A) where you are working, use ear protection!
►We recommend that you wear work gloves
and protective goggles when using the mixer.
Regulations require that you wear close-fitting
clothing.
►To protect yourself from harmful dust while
mixing, wear a dust mask. Some mineral
materials are deemed to be carcinogenic. Use a
dust extractor wherever possible. To select suitable
dust extraction systems or dust masks please refer
to the information of the material manufacturer's.
►Always connect machines via an earth-leakage
circuit-breaker.
Read and observe the operating
instructions for the machine before
you start it up!
Always wear protective goggles and
ear protection while working.
It is advisable to wear a dust mask
whenever working with materials
which generate large amounts of
dust.
Always wear protective gloves while
working.
Ensure that the mixing
EN