BRINKMAN 810-3016-S Manual Del Propietário página 6

Choose a good, cleared assembly area and get a
friend to help you put your grill together. Lay
card board down to protect grill finish and
assembly area. Turn the grill on its side to begin
assembly.
Step 1
Connect right and left legs together (2 pairs).
The yellow label is for the front legs.
Step 2
Attach leg braces with support flange towards
center of grill onto the legs using four
M5 x 12 mm Phillips head bolts. Do not tighten
until Step 5 is completed. Next, install firebox
support bracket onto the holes on the left legs
using two M5 x 12 mm Phillips head bolts. Do
not tighten until Step 5 is completed.
NOTE: With the help of a friend, turn cart
assembly over.
Step 3
Attach the shelf to the legs using four
M5 x 12 mm Phillips head bolts as illustrated.
5
INS_810-3016-S.indd 6 INS_810-3016-S.indd 6
Front Shelf
Bracket Holes
8/22/14 10:22 AM 8/22/14 10:22 AM