AEG KMK761080B Manual De Instrucciones página 104

12.2 How to manage: Error codes
When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.
Code and description
F240, F439 - the touch fields on the display do not
work properly.
F908 - the appliance system cannot connect with the
control panel.
When one of these error messages continues to appear on the display, it means a faulty
subsystem may have been disabled. In such a case contact your dealer or an Authorized
Service Centre. If one of these errors occurs, the rest of the appliance functions will continue to
work as usually.
Code and description
F131 - the temperature of magnetron sensor is too
high.
12.3 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the appliance cavity. Do not
remove the rating plate from the appliance
cavity.
13. ENERGY EFFICIENCY
13.1 Energy saving
Make sure that the appliance door is closed
when the appliance operates. Do not open
the appliance door too often during cooking.
Keep the door gasket clean and make sure it
is well fixed in its position.
Use metal cookware to improve energy
saving (only when you use a non-microwave
function).
When possible, do not preheat the appliance
before cooking.
104 ENGLISH
Remedy
Clean the surface of the display. Make sure there is no
dirt on the touch fields.
Turn the appliance off and on.
Remedy
Turn the appliance off and wait until it cools down. Turn
the appliance on again.
We recommend that you write the data
here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Keep breaks between baking as short as
possible when you prepare a few dishes at
one time.
Cooking with fan
When possible, use the cooking functions
with fan to save energy.
Residual heat
If a programme with Duration is activated and
the cooking time is longer than 30 min, the
heating elements automatically turn off earlier
in some appliance functions.
The fan and lamp continue to operate. When
you turn off the appliance, the display shows
.........................................
.........................................
.........................................