Possible causes
Defective pump motor
Defective pipe
Possible causes
Not enough water flow. The cell may be blocked with
debris Pump not primed.
Flow switch not plugged in.
The pump doesn't give enough flow
Ball valves are closed
The filter is clogged
Blocked cell
Flow switch not properly installed
Defective flow switch
Possible causes
Not enough chemical solution in the tank
Option activated 'ON' and float wrongly cabled or not
cabled
Blocked float
Possible causes
Wrong connections
Pump not supplied
7.0 WARRANTY
The MIXY LINK dosing pump is guaranteed against all material and/ all manufacturing defect for 3 years
as from the date of delivery to the first customer.
The purchase invoice must be forwarded with any claim under warranty.
This warranty is granted subject to strict compliance with the assembly and maintenance instructions.
The warranty will not apply in the event of non-compliance with those conditions.
No repairs or replacements carried out under warranty can result in any prolongation of the said period
of warranty. The purchase invoice will be requested with any claim under warranty.
100897- indB – 0209
SECURITY ALARM
Contact your retailer
Check the installation
FLOW ALARM
Remove anything that blocks water and/or clean the
cell
Plug in the flow switch.
Check that the pump works properly, for instance it
may be drained, or the strainer basket blocked.
Check that the ball valves are lined up. Correct if
necessary.
Clean the filter
Remove the cell in order to monitor it.
Check the cell cleaning instructions
Make sure the flow switch is plugged in.
Contact
representative.
LOW LEVEL TANK ALARM
Pour the dedicated product in the tank
Carefully check the nature of the chemical products
before filling the tank
Cable again the 2 wires of the float
Take the float out, rinse it with water and check if it's
working when dry.
Replace it if necessary
AUTO START ALARM
Check
Check
24 / 40
Corrective actions
Corrective actions
you
retailer
or
Corrective actions
Corrective actions
authorized
service