Smartwares C723IP Manual Del Usuario página 21

Idiomas disponibles

• Click on 'submit' after this.

The camera restarts automatically when you click 'submit' . This takes approximately 30

seconds.

• Close your browser and camera tool after the computer has restarted.

• Remove the network cable from the camera.

• Open the IP camera tool and click on your camera's address. You can now operate your

camera wirelessly.

• If your camera is not in the camera tool window, right click on the tool window, then

press the "refresh camera list" option.

4.6. Camera installation

Please note! Make sure that the camera functions properly in the chosen location

before starting installation.

You can choose to place the camera on a at surface, or to attach the camera to the

location of your choice with screws.

To mount the camera using screws, perform the following steps:

• Screw in the base of the camera with the aid of the 4 included screws

Please note! If the surface is too hard for the screws (stone/concrete), you will need to

drill holes and use the screw plugs which are included.

• Screw the camera back onto the base.

4.7. Adjusting the camera angle

• Unscrew the knob on the side of the base

• Then adjust the camera angle and tighten the knob again

5. Managing your camera using your

smartphone

Make sure your camera(s) is/are connected to your smartphone via the ELRO INSTALL App

(see section 4.1 and 4.2).

5.1. You can view your camera image on your Android

smartphone

• On the initial screen of the App press the camera you want to manage.

picture appears on your smartphone.

• Swipe your nger across the screen to zoom in and out and to move the camera image.

Please note! If you do not have a picture it is possible that your wireless connection is

not fast enough. In that case change the resolution of your camera image (see section

5.1.1)

The camera screen provides a number of options:

• Press the "Snapshot" button

• Press the "mute/listen/speak" button

to make a snapshot of your camera image.

to adjust your sound settings.

The camera