Metra 95-7807T Instrucciones De Instalación página 6

Double DIN radio provision
1. Mount the (2) factory clips to the
radio housing. (Figure A)
2. Mount the climate switches to the
radio housing using (6) of the
#8 x 1/2" screws on the upper
and outside mounts. Do not install
the screws on the bottom mounts
shared by the radio brackets
until installing the radio/bracket
assembly. (Figure A)
3. Mount the radio to the brackets
with the screws supplied with the
radio. (Figure B)
Kit Assembly
(Figure A)
(Figure B)
95-7807
4. Mount the radio/bracket assembly
to the radio housing with (4) of the
supplied #8 x 1/2" screws.
(Figure C)
5. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and AXXESS.
6. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
6
(Figure C)