Anker Solix Serie Manual De Instalación página 24

1. Mount the solar panel support beams on the solar panel.
A x2
1160 Solar Panel Support Beam
mm
2. Install the vertical support scaffolding and solar panel support beams without tightening the screws.
B x2
1006 Vertical Support Sca olding
mm
H x2
M6×14 Hexagon Flange Bolt
3. Mount the lower support beams and adjust the angle for maximum sunlight exposure.
Note: Make sure that both ends of the lower support beams are aligned with the same number.
41 EN
H x4 J x4
M6×14 Hexagon Flange Bolt M6 Flange Nut
C x2 H x4
600
Lower Support Beam M6×14 Hexagon Flange Bolt
mm
4. Tighten all the screws with 5N.m torque.
N x1
Hexagon Wrench
5. Connect the solar panel with the solar panel extension cable.
Note: To avoid falling, secure the solar panel extension cable on the balcony railings temporarily with zip ties.
B
45
A
°~ °
5N.m
C
40 35 30
EN 42