Publicidad
Idiomas disponibles
Idiomas disponibles
③ Tap Add Devices/+ > MI80 Microinverter (BLE).
④ Select your home's Wi-Fi, enter the password, then click the Next button. You will be directed to the Scanning page. Wait a moment.
⑤ If you are redirected to the No Devices Found page, press the Retry Now button, then repeat step 4.
⑥ If you are redirected to the Added Successfully page, the configuration is complete. You can also revise the device name on
this page.
Manual Mode:
① Scan the QR code or search "Anker" on the App Store, Google Play, or other official app stores to download the app.
② Sign up/log in to your Anker account.
③ Tap Add Devices/+ > Balcony Solar Power System > MI80 Microinverter (BLE).
④ Follow the in-app instructions and tap The device has been reset.
⑤ Select your home's Wi-Fi, enter the password, then click the Next button. You will be directed to the Scanning page. Wait a moment.
⑥ If you are redirected to the No Devices Found page, press the Retry Now button, then repeat step 4.
⑦ If you are redirected to the Added Successfully page, the configuration is complete. You can also revise the device name on
this page.
14. For your privacy and security, the microinverter will automatically turn off Bluetooth after commissioning
is finished. You can turn on the microinverter's Bluetooth again by disconnecting and reconnecting the DC
wires. Follow the above steps to complete commissioning within 15 minutes.
51 EN
On the Ground
What You Need
A
1160
mm
Solar Panel Support Beam (×2)
B
1006
mm
Vertical Support Sca olding (×2)
C
600
mm
Lower Support Beam (×2)
F
G
Zip Tie
M6×100 Hexagon Flange Bolt (×4)
J
K
M6 Flange Nut (×15)
304 Stainless Steel Hose Clamp (×4)
N
Hexagon Wrench
H
M6×14 Hexagon Flange Bolt (×15)
M
Phillips Screwdriver
(Not included)
Work Gloves
EN 52
Publicidad
