Adjustment methods of each part
Note: Before using the bicycle, insert the key and turn it counterclockwise by 45°, the battery is activated.
Finished using the bicycle, turn the key 45° clock wise, the battery is powered off, and take out the key.
Remove the battery step, insert the key, press it upward and then rotate it 90° clockwise. Note that need
to remove the key and then take out the battery to avoid damaging the key.
3.Take out the battery and charge the
battery separately
VIII.Instructions for using the code table:
1. Long press Power key for 3 second to switch on/o the ebike;
2. In the power-on state, press POWER KEY, the multi-function area will display ODO, TRIP, TIME.
ODO: Total mileage of this bicycle
TRIP: Miles since the ride
TIME: Start-up time of this ride
3. Press the "+" button to increase the gear. The higher the gear, the faster the speed.
4. Press the "-" button to lower the gear. The lower the gear, the slower the speed.
5. PAS gear: (After pedaling to 6 km/h, start the power assist)
Gear 1: Max 15km/h
Switch on/o
Gear 2: Max 20km/h
Gear 3: Max 25km/h
Assist gear
4. You can also choosevehicle
Red light indicates normal charging Green
light indicates charging completed
Vehicle status
Battery power
Speed display
08
charging
Multifunctional display area