MSG Equipment MS900 Manual De Usuario página 12

English
MS900 stand
11 - Button to activate the process of filling the tank with water. Pressing the button again
stops the process.
The washing process settings window allows you to set the following parameters:
"Time cycle" - total washing time.
"Impulse time" - duration of the compressed air pulse.
"Impulse pause" - time between compressed air pulses.
"Blow after wash" - time for air blowing of the filter after washing.
"Min tank level" - minimum water level in the tank at which the washing process stops. It is
recommended to maintain a level of 50% for washing passenger car filters and 90% for
commercial vehicles.
The information window (Figure 7) displays a list of detected errors. After resolving them, it is
necessary to clear the errors using the "Clear error" button, after which the module can continue
its operation. This window also allows access to the service menu.
12
Figure 6
Figure 7