Dräger FPS IMD Instrucciones De Uso página 19

3 Description
3.1 Product overview
See Figure A on the fold-out page
1 Pairing symbol
2 On/Off button
3 LED
4 Brightness sensor
5 Adjustable optics
6 Charging pins (on the underside of the Dräger FPS IMD)
7 Screw for mounting the optics
8 FPS Quick Adapter
3.2 Feature description
The In-Mask Display (IMD) displays the thermal images that are sent from the
Dräger UCF FireCore thermal imaging camera.
Additionally, the following information is displayed:
– Charge status of the rechargeable battery in the thermal imaging camera
– Charge status of the rechargeable battery in the In-Mask Display
– Square for spot temperature
– Temperature scale
– Numerical temperature value
Depending on the situation, the In-Mask Display also shows the following
information:
– Overheating of the thermal imaging camera
– Overheating of the In-Mask Display
– Remaining storage capacity for image capture
– Confirmation that an image has been captured
The In-Mask Display is inserted into a full face mask of type Dräger FPS 7000
using the FPS Quick Adapter. The optics can be set in 3 positions.
The brightness sensor in the In-Mask Display allows the displayed image to be
adapted to the brightness of the environment (can be configured).
If the In-Mask Display has not received a video signal after a preset time, it
switches to Standby mode.
Dräger FPS IMD
|
Description en
19