Safety Precautions
CAUTION
• Handles should not be removed or reattached by anyone
other than the professional installation technician or service
personnel.
• If handles must be removed due to specific installation
conditions, the mounting screws should be stored carefully
together with the handles. To ensure safety, the mounting
screws should be tightened to a minimum torque of 2N·m
(20 kgf·cm) when reattaching the handles.
• When moving the display, it should always be carried by two
persons holding the rear handles in the manner shown.
a hole
Air vents (fan)
a hole
Center line
Rear view diagram
NO!
• Never attempt to move the Plasma Display by holding only
one of the handles.
• When installing the Plasma Display, do not use the handles
as means of hanging the display; also do not use them as
devices to prevent tipping over (see illustration).
Main unit
Center line
Side view diagram
02
Attaching surface
Installation
bracket, etc.
a hole
Bolt
12 mm to 18 mm
11
En