Using Dvi Input; Connecting Dvi Equipment; Watching A Dvd Image; Connecting A Dvd Player - Pioneer PDP-5000EX Manual De Instrucciones

Enjoying through External Equipment

Using DVI Input

This Plasma Display is equipped with a DVI terminal (INPUT1)
which accept digital video.
Before starting the menu, press INPUT 1 on the remote control
unit to select INPUT1.
Input signal correlation table
1920*1080i@50 Hz
720*576p@50 Hz
1280*720p@50 Hz
1920*1080i@59.94/60 Hz
720*480p@59.94/60 Hz
1280*720p@59.94/60 Hz
NOTE
• See the section "Computer compatibility chart" (page 37)
regarding supported computer signals.

Connecting DVI equipment

INPUT1
DVI-D
DVI-D cable
(commercially
available)
AUDIO cable
(commercially available)
To activate the DVI terminal:
When you use the INPUT1 terminal, use the following
procedure to activate the terminal.
1
Press HOME MENU.
2
then ENTER (ENTER/DISP.)).
Select "Setup" ( /
3
Select "INPUT1" ( / then ENTER (ENTER/DISP.)).
4
Set the "AV" setting.
5
Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
NOTE
• See the section "Watching an image from a personal
computer" (page 36) regarding connections to a computer.
INPUT1
R L
DVI equipment
To specify the type of digital video signals:
1
Repeat steps 1 to 3 rovided for "
terminal
".
2
Select "Video" ( / ).
3
Select the type of digital video signals ( / ).
Item Description
RGB (16 - 235)
Didital RGB signals (16 to 235) locked
RGB (0 - 255) Didital RGB signals (0 to 255) locked
4
Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
NOTE
• This selection is disabled when "Signal Type" is set to "PC".
For details on setting the signal type, see the section "To
activate the DVI terminal".
• If the images do not come in crearly, specify another digital
video signal type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equipment.

Watching a DVD image

Input signal correlation table
1920*1080p@24 Hz
1920*1080i@50 Hz
1920*1080i@59.94/60 Hz
1280*720p@50 Hz
1280*720p@59.94/60 Hz
720*576p@50 Hz
720*576i@50 Hz
720*480p@59.94/60 Hz
720*480i@59.94/60 Hz

Connecting a DVD player

Use the INPUT4, 5 or 6 terminal when connecting to a DVD
player and other audiovisual equipment.
INPUT4 COMPONENT VIDEO / ANAROG RGB
Y Pb/Cb Pr/Cr
G B R HD VD
BNC/Pin
conversion
adaptor
Component cable
(commercially available)
AUDIO cable
(commercially available)
To activate the DVI
INPUT4
R L
DVD player
11
35
En