Publicidad
Idiomas disponibles
Idiomas disponibles
7.5
EXTENSION OF THE POLE SAW
1. Fit the extension pole between the pole saw handle and
the pole saw head to achieve the maximum length.
2. Slide the collars upwards.
3. Turn the collars clockwise to tight them.
WARNING
Periodically check the tightness of the connection of the
collars.
7.6
CUTTING PREPARATION
Before you start to cut, make sure that
•
Wear heavy gloves for maximum grip and protection.
•
Maintain a proper grip on the machine during operation.
•
Use your right hand grip on the rear handle while
your left hand grip on the pole shaft.
•
Keep your body to the left of the chain line.
•
Never use a left-handed (cross-handed) grip, or any
stance that places your body or arm across the chain
line.
•
Never stand directly under the limb you are cutting.
•
Periodically examine the tightness of the collars during
operation.
7.7
INSTALL THE BATTERY PACK
WARNING
•
If the battery pack or charger is damaged, replace the
battery pack or the charger.
•
Stop the machine and wait until the motor stops before
you install or remove the battery pack.
•
Read and understand the instructions in the battery and
charger manual.
English
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
7.8
REMOVE THE BATTERY PACK
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
8
OPERATION
Remove the battery pack and keep hands clear of the lock
out button when you move the machine.
Examine the chain tension before each use.
8.1
EXAMINE THE CHAIN OIL
Do not use the machine without sufficient chain oil.
1. Examine the oil level of the machine from the oil
indicator.
2. Add the oil if it is necessary.
8.2
START THE MACHINE
1. Install the battery pack into the machine.
2. Press the top paddle (3).
3. Pull the lock-out button (1) upward with your thumb.
4. Press the trigger (2).
8.3
STOP THE MACHINE
1. Release the trigger to stop the machine.
9
NOTE
IMPORTANT
NOTE
EN
Publicidad
