Publicidad
8
c)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
d)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate
tools for the given task. A correctly-selected device
will perform the task for which it was designed better
and in a safer manner.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
d)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h)
Do not move, adjust or rotate the device in the
course of work.
i)
Do not leave this appliance unattended while it is in
use.
j)
Clean the device regularly to prevent stubborn grime
from accumulating.
k)
Do not cover the air intake and outlet.
l)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
m)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
n)
Keep the device away from sources of fire and heat.
o)
Do not tilt the unit during operation. The unit must
be operated only in upright position.
p)
During operation, some parts of the device get very
hot. To avoid burns, do not touch hot parts!
q)
When the unit is on, do not cover it or place
materials on it. This may cause the unit to overheat
and/or cause a fire.
r)
Only distilled water should be poured into the
water tank. Do not add any chemical ingredients or
essential oils.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. RULES OF USE
This appliance is intended for production of warm, humid
air. This product is used for moisturising hair and scalp
during beauty treatments or hair styling.
The user is responsible for any damage caused by non-
intended use.
3.1. APPLIANCE OVERVIEW
1
2
3
7
4
8
5
9
6
1.
Body
2.
Water fill port
3.
Power switch (ON/OFF)
4.
Timer
5.
Water tank
6.
Base
7.
Bonnet
8.
Waste water tank
9.
Adjustable stand
3.2. PREPARATIONS FOR OPERATION
POSITIONING THE APPLIANCE
The
maximum
ambient
temperature
and
relative
humidity limits not to be exceeded are +40°C and 85%
RH, respectively. Position the appliance where good air
circulation is ensured. Maintain a minimum clearance of
10 cm from all sides of the appliance. Keep the appliance
away from any hot surfaces. Always operate the appliance
on a level, firm, clean, fireproof, and dry surface and out of
the reach of children and individuals with reduced mental,
sensory and intellectual capacities. Position the appliance
where the mains plug can be reached at any time. Make
sure that the mains power ratings match the data on the
rating plate!
INSTALLING THE APPLIANCE
3.3. OPERATING THE APPLIANCE
1.
Plug the appliance to the mains.
2.
Fill the water tank with demineralised water. Keep
the water level between the marks on the tank.
3.
Turn the power switch ON. Operate the timer dial to
set the desired running time of the appliance. The
water begins to heat. Approximately 5-8 minutes
later, the steamer begins to steam (the heating time
before steaming depends on the water volume in
the tank).
NOTE! When the appliance detects the water level
is below the minimum, it will turn off automatically!
Before restarting the appliance, turn the power
switch OFF, refilling the tank with demineralised
water. Turn the power switch ON. The appliance
begins to generate steam once it has heated water
to the correct temperature.
4.
Frequently check the waste water tank level. When
the waste water tank is full, remove, empty it of
waste water and reinstall in the appliance.
9
Publicidad
