Duronic ICM12 Manual De Instrucciones página 12

Problem
The ice making process
was correct, but no ice
has come out.
All indicators twinkle
simultaneously.
The machine has been
working, but the water
has been warming up
When the ice is full, the
machine does not display
the ICE FULL icon
Troubleshooting (Continued)
Possible Cause
1. The compressor has
no refrigerant
2. Compressor damaged
3. Fan motor damaged
Water tray is blocked by
ice cubes.
Solenoid has broken
down
'Ice Full' sensor is
damaged
Call Duronic Customer
Care Team for advice.
Unplug the power,
take out the ice which
blocking the tray, then
plug in the power and
press the POWER
button.
The machine will restart
after around 3 minutes.
Call Duronic Customer
Care Team for advice
Call Duronic Customer
Care Team for advice
12
Suggested Solutions