Duronic ICM12 Manual De Instrucciones página 9

1. Open the transparent lid, take out the ice basket and add water to the water
tank. The water should not exceed the MAX mark. Use either cold or room-
temperature water to fill the tank. Do not fill the tank with hot water.
If the water exceeds the MAX mark, you will need to drain a little water away.
You do this by opening the bottom drain plug and releasing some water.
2. Put the ice basket back into the machine and close the lid.
3. Plug in the machine and switch it on at the plug.
4. Press the power button. All 4 indicator lights will momentarily light up and then
turn off. Only the 'SMALL' light will remain on. The machine is now in standby
mode.
5. To select the size ice you would like to make, press the power button again.
The indicator lights for 'SMALL' and 'LARGE' will light up alternately switching
between each one. Wait for the light to be lit on the size option you prefer and
then press the power button to select the size.
6. The machine will then start to make ice cubes.
7. When the ice basket is full, the machine will automatically stop. Remove the
ice cubes using the ice scoop. The machine will then restart and continue
making ice cubes.
8. When you have finished making ice cubes, turn off the machine by pressing
the power button again. Switch off the plug socket and unplug the cable from
the mains socket.
To ensure the ice made is fresh, change the water in the reservoir at least
once a day. If you do not plan to use the machine for a long time, drain the
water out and clean the machine before storing it away.
How to Use
9