Honeywell QUIETCLEAN HFD010 Serie Manual Del Usuario página 5

MAINTAINING YOUR WASHABLE PRE-FILTER
To remove the pre-filter:
• Press the top tab to release the pre-filter from the filter
assembly (Fig. 9).
• Hold the frame steady from the side while pushing in the
center of each pre-filter from the back side of the frame
(Fig. 10).
• Separate the pre-filter from the frame and you can then pull it
completely away from the frame (it will snap out).
To clean the pre-filter:
The pre-filter helps capture large airborne particles that enter the filter. This pre-filter
can be periodically removed and shaken or vacuumed clean. Alternatively, it can be
rinsed by hand under warm water to clean (Fig. 11). Let the pre-filter dry completely
before inserting it back into the unit.
WARNING: Filters may be harmful if ingested. Avoid breathing dust when cleaning
or changing filters.
CLEANING AND STORAGE
We recommend that you clean the air purifier at least once every 3 months and before extended storage. Use
only a dry cloth to wipe the external surfaces of the air purifier. DO NOT USE WATER, WAX, POLISH, OR ANY
CHEMICAL SOLUTION.
ACCESSORIES AND REPLACEMENT FILTERS
If you have any questions about your Permanent, Washable ifD
Relations at 1-800-477-0457.
FREQUENTLY ASKED QUESTIONS
How long should I run my Air Purifier?
It is recommended that you run your air purifier when you are at home to help purify the air.
This unit will be more effective when doors and windows are closed.
How often is cleaning required?
Depending on the air quality of the room, we recommend cleaning the Washable Pre-Filter once a month and
the Permanent, Washable ifD® Filter approximately every 3 months.
My Air Purifier is starting to make noise and the air output is less. What's wrong?
The filters may be dirty. High amounts of particles can block the pores in the filter and stop the air from
moving through it. The filter and pre-filter should be cleaned.
Fig. 9
®
Filter or the Washable Pre-Filter, call Consumer
5
Fig. 10
Fig. 11