Publicidad
Idiomas disponibles
Idiomas disponibles
CHIMNEY DECORATION PANEL
INSTALLATION
1.
Remove the Chimney Decoration Panel from the package.
2.
Align the hooks of the Chimney Decoration Panel with the groove of the range top and insert.
3.
Take out the screws from the fittings and fasten the Chimney Decoration Panel with the screws on the back of the range.
Operation
INSTRUCTIONS FOR USING YOUR
GAS RANGE
● Using proper flame size: adjust flame so it does not extend beyond the edge of pans. Undersized pans will expose a portion
of the burner flame to direct contact and may result in ignition of clothes. Proper pan and flame size will improve efficiency.
Burners are different sizes for different pan sizes. The cabinets above the range has the potential risk of fire during gas
range operation.
● Know which knob controls each surface burner. Place a pan of food on the burner before turning it on, and turn the burner
off before removing pan.
● Always turn the knob to the full HI position when igniting top burners and visually check that burner is lit.
● Then adjust the flame so it does not extend beyond the edge of the utensil.
● Utensil handles should be turned outward and not extend over adjacent surface burners. This will help reduce the risk of
burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil.
● Never leave surface burners unattended at high heat settings: Boil overs cause smoking and greasy spillovers that may
ignite.
● Protective liners: Do not use aluminum foil to line surface burner pans, except as suggested in this manual. Improper
installation of these liners may result in electric shock or fire.
CCD-0007992 Rev: 09-06-23
- 7 -
Publicidad
