Harman AKG IVM 4500 Modo De Empleo página 23

IVM4500_F031109_Hex_1:Layout 1
1
1. Make all audio connections.
2. Connect the antenna to the transmitter.
3. Connect the transmitter to power.
4. Insert the supplied batteries into the SPR 4500 receiver.
5. Select a clean frequency on the receiver ("AUTO" menu, section "Automatic
Frequency Selection").
6. Connect the earbuds to the receiver.
7. Tune the transmitter to the same frequency you selected on the receiver (sec-
tion "Selecting Frequencies from the Preset Screen").
8. Set RF output on the transmitter (sections on "Frequency Selection").
9. Set input gain on the transmitter (section "Setting Input Gain").
10. Set the desired volume for the earbuds.
IVM 4500
21.09.2011
Getting Started Quickly
2
21:11 Uhr Seite 23
3
6
10
(Schwarz/Black Auszug)
23