Publicidad
40980.M
System
The IPo2W system allows video door entry devices to communicate
with each other via the TCP/IP protocol, using a connection over
non-polarised 2-wire cables.
In general the IPo2W system is composed of:
- Outdoor Station. Between 1 and 4 outdoor stations can
be connected. Each outdoor station can be configured to
communicate with up to 4 apartments.
- Indoor Station. Between 1 and 4 indoor stations can be
connected in an apartment.
- IPo2W converter Designed to connect IP cameras to the 2-wire
bus via Ethernet protocol.
- System power supply unit. A single System power supply
unit supports up to 4 outdoor stations, 4 indoor stations per
apartment, for up to 4 apartments (a total maximum of 16 indoor
stations) and 5 converters for system cameras.
The IPo2W system supports the connection of up to 8 IP cameras,
per individual apartment, for up to a maximum of 4 apartments. The
IP cameras are connected using the apartment router via Wi-Fi or
Ethernet cable and are called "apartment cameras".
Moreover, the IPo2W system supports the connection of up to
20 IP cameras via the IPo2W converters, and are called "system
cameras". The system allows up to three simultaneous calls or
video previews; however, a single video stream per apartment can
be shown on the monitors, while audio calls are possible on the
other monitors.
Please refer to "Elvox TVCC integration in IP-over-2-Wire system"
document in the product page of Vimar web site to find the detailed
list and the configuration parameters of compatible IP cameras.
Assuming that the system power supply unit is the device at the
centre of the video door entry system, indoor stations, outdoor
stations and converters for cameras can be connected to the power
supply unit with a star topology, a daisy-chain connection (i.e. in-out
connection) or a mixed connection (star and daisy-chain).
Indoor Station
Functions
• 7" capacitive touch screen monitor
• Answer video door entry calls from outdoor stations and audio
intercom calls from other indoor stations or from the View Door
App
• Video and audio previews from outdoor stations and optional
connected IP cameras
• Wi-Fi connectivity
• Possibility of receiving firmware upgrades via OTA (Over The
Air)
• Remote operation of calls via the VIEW Door App on one or
more smartphones
• Actuator enable/disable (powered lock and gate relay or other
actuator)
• Internal flash memory and micro SD card support (not included)
• Automatic and manual video/image recording
• Voicemail
• Intercom Call between indoor stations of the same apartment
and between groups of indoor stations of different apartments.
• Full-duplex audio with echo cancellation and noise reduction
functions
• Adjustable conversation and ringtone volumes
• Selectable ringtone (for outdoor station, intercom, landing)
• Adjustable ringtone duration (for outdoor station, intercom,
landing)
• "Do not disturb" function
• Connection for Landing Call button shared between the
apartment group monitors
• Support for call repetition from outdoor station, intercom call,
landing call, call from View Door App connected to the monitor
• Support for external sensors and alert management
• Voice Assistant mounting frame (Amazon Alexa and Google
Home)
• Multi-lingual user interface
• soft touch push button for preview; soft touch push button
for lock; 4 status icons (messages, Wi-Fi disconnected; lock
activated; "Do Not Disturb" function). Backlit buttons and icons
Technical data:
• DC input: 32V via system bus (use the power supply unit
provided in the kit)
• 7" LCD TFT screen
• LCD resolution 1024 x 600 (RGB)
• Micro SD card slot: SDHC format, -
Speed class: Class4 - Class10
• Internal flash memory to store videos, images and audio
messages
• Dimensions (mm) 184 (L) x 146 (H) x 24 (D): the overall
dimensions of the monitor, with or without surface mounting
frame (bracket), do not vary
• IEEE 802.11 b/g/n 2.4GHz Wi-Fi Client – If the indoor station
is connected to the Wi-Fi, we recommend positioning it where
the Wi-Fi signal strength is at least -60 dBm, in other words two
lines in the related icon
• Frequency range: 2412-2472 MHz
• RF transmission power: < 100 mW (20 dBm)
• Surface-wall mount installation
• For installation with flush mounting boxes:
- Mounting box 7249 (with bracket 40196)
- Round mounting box 2M V71701
- Horizontal/vertical mounting box 3M V71703, V71303
- British Standard square mounting box
• Operating temperature: from -10 °C to 40 °C
• Relative operating humidity: from 0% to 90%
N.B.: For the "View Door" App to work correctly with the IPo2W
system (the system can also operate stand-alone without the App),
a suitable Internet connection must be available.
App
MyVimar account is needed to use the View Door App with IPo2W
devices.
Available for both Android and iOS Systems.
Functions
• Support for audio/video calls from outdoor stations
• Function for consulting IP cameras connected
• Audio/video preview from outdoor stations
• Support for audio calls from and to indoor stations
• List of calls received function
• Image and/or video saving function from calls or consultation
• Multi-device management function
• Lock or relay remote activation
• Setting communication time from 60s to 300s
• Auto-rotate image function
• Ability to set image quality: HD - SD - LD
The choice of resolution applies to images from an outdoor
station. Images from apartment cameras and system cameras
can be consulted via App with fixed resolution.
• Zoom function support
• Sensor activation mode management and alert signalling
EN
Memory size 8 – 128 GB,
3
Publicidad
