FAFREES F26 CarbonX/M Manual Del Usuario página 16

Idiomas disponibles

Step 6: Tire reflector installation.

Step 7: Install saddle.

Step 8: Inflate tires.

Check that the tire beads and tires are evenly seated on the rims. Use a pump with a Schrader valve to

inflate each tire to the recommended pressure indicated on the tire. Do not overinflated or underinflate

tires.

BATTERY CHARGING

Charging procedure

Follow these steps for charging your ebike battery from Fafrees Bikes:

1. Ensure the battery is off.

2. Remove the rubber cover on the charging port.

3. Plug the charger into the battery ' s charging port, BEFORE PLUGGING CHARGER INTO

POWER OUTLET.

With the battery on or off the bike, place the charger in a flat, secure place, and connect the DC output

plug from the charger to the charging port on the side of the battery.

Place the reflector at the highest point between the spokes and

secure it to the spoke behind the reflector.

Open the seatpost clamp lever, adjust the seatpost to a

comfortable height, while ensuring the seatpost is

inserted past the minimum insertion point, as indicated

on the seat post, close the seatpost clamp lever.