KALLISTA P22121 Guia De Instalacion página 3

All manuals and user guides at all-guides.com
Pop-Up Knob
Spout
Spout Shank
Spout Gasket
Shank Washer
Shank Nut
Tee Nut
Tee Bottom Seal Nut
Tee
Pop-up Rod Sleeve Cap
1. Spout Installation
Slide the spout onto the spout shank.
Tighten the spout decorative nut by hand.
Remove the sleeve cap.
Loosen the tee bottom seal nut counterclockwise.
NOTE: Using tools will damage the finish.
Remove the tee by turning the tee nut counterclockwise.
Remove the shank nut and shank washer.
Make sure the spout gasket is in place.
Slide the spout shank through the mounting hole.
Reinstall the shank washer and shank nut.
Wrench tighten the shank nut.
Reinstall the tee. Wrench tighten the tee nut.
Tighten the tee bottom seal nut.
Reinstall the sleeve cap.
Kallista 3 1004811-2-A