Hillyard Trident WD21V Manual De Uso página 39

Proceed as follows for replacing the front rubber blade of the squeegee body:
1.Release the hinge (6) on the front part of the squeegee.
2.Slide the rubber-pressing blades (7) outwards to free the squeegee rubber.
3.Remove the rubber (8) and replace it.
4.Proceed in reverse to replace the rubber.
Proceed as follows for replacing the rear rubber blade of the squeegee body:
1.Release the hinge (9) on the front part of the squeegee.
2.Slide the rubber-pressing blades (10) outwards to free the squeegee rubber.
3.Remove the rubber (11) and replace it.
4.Proceed in reverse to replace the rubber.
ATTENTION: remember that the correct position for
the front rubber is with its flat surface in contact with
the squeegee.
ATTENTION: remember that the correct position for
the front rubber is with its flat surface in contact with
the squeegee.
39