Qlima P 426 Instrucciones De Uso página 89

1 Remove the condensation cover at the rear of the unit by turning it anti-
clockwise and remove the rubber cap from the drain (see fig. 14).
Fig. 14
2 Connect the supplied hose grommet H (see fig. 1) to this drain (see fig. 15).
Fig. 15
3 Join the water hose (not supplied) to the hose grommet (see fig. 16).
4 Make sure that the condensation hose is connected to a drain or collection
tank.
5 Make sure that the drain hose does not hang in the water and that it always
runs downwards (see fig 17).
Fitting power cable clips
1 Fit the supplied cable clips E with the screws F (see fig. 1) to the rear of the air con-
ditioner (see fig 18).
Fig. 16
Fig. 17
4
89