Publicidad
Idiomas disponibles
Idiomas disponibles
•
Check that battery cables are securely tightened to
batteries each time you service the battery.
•
Keep grass, dirt and debris from collecting near battery
terminals and in battery area.
•
Charge batteries indoors in a well-ventilated and dry
location away from sparks or flames. Never expose
charger to rain, vapor or liquid.
•
Charge only lithium batteries provided by Greenworks.
•
Do not touch uninsulated portion of charger (terminal
pins) or of output connector.
•
Do not use with defective cords and wires. Replace
defective cords and wires immediately.
•
For long-term storage, please make sure the storage
temperature is -4°F - 113°F within one month, and 32°F -
95°F between two and 12 months.
•
The working environment of the battery pack is 14°F -
113°F. Battery pack can be used a -5°F - 131°F for
discharge, and 32°F - 107°F for charge.
11.7
BATTERY COMPARTMENT
FILTER MAINTENANCE
Replace the battery compartment filter every 200 hours.
11.8
SERVICE
IMPORTANT
Wait for all movement to stop before adjusting, cleaning or
repairing. Repairs or maintenance requiring power should
be performed by trained maintenance personnel only. Read
and observe safety warnings in front of manual.
IMPORTANT
Repairs or maintenance requiring power should be
performed by trained maintenance personnel only.
•
Park the mower on level ground. Make sure that you set
the park brake, and that the deck blade switch is in "OFF"
position. Raise deck, rotate key to "OFF" position,
remove key from switch and disconnect battery cables by
pulling inward on RED battery quick disconnect handle
in battery box compartment.
•
Any maintenance operation that requires the removal of
safety covers must be performed by a trained service
technician.
•
Before working on or under the deck, make certain
ignition switch is "OFF" and key is removed and deck
blade switch cannot be accidentally started and
disconnect battery cables by pulling inward on RED
battery quick disconnect handle in battery box
compartment.
•
Use a stick or similar instrument to clean under the
mower, making sure that no part of the body -- especially
arms and hands -- is under mower.
•
Keep your machine clean and remove any deposits of
trash and clippings.
English
•
Keep battery compartment, deck and operator's station
clean of accumulated trash, grass clippings, and other
debris.
•
Clean battery compartment, drive motor compartment,
mower deck, seat, etc., of all dirt and debris. To clean, use
only compressed air. DO NOT use water, solvents, hard
cleaners or abrasives.
•
Always wear adequate eye protection when servicing the
batteries or when grinding mower blades and removing
accumulated debris. Never attempt to make any
adjustments or repairs to the mower's drive system,
mower deck or any attachment while the traction drive
system is running. Repairs or maintenance requiring
power should be performed by trained maintenance
personnel only.
•
Never work under the machine or attachment unless it is
safely supported with jack stands. Make certain machine
is secure when it is raised and placed on the jack stands.
•
The jack stands should not allow the machine to move
when the traction drive system is running and the drive
wheels are rotating. Use only certified jack stands. Use
only appropriate jack stands, with a minimum weight
rating of 2000 pounds (907.2 kg) to block the unit up.
Use in pairs only. Follow the instructions supplied with
the vehicle stands.
•
Do not touch hot parts of machine.
•
Keep nuts and bolts tight, especially the blade attachment
bolts. Keep equipment in good working condition.
•
Never tamper with safety devices. Check their proper
operation regularly.
•
Turn the key to the "OFF" position before unclogging the
discharge chute.
•
Never clear the discharge chute with the machine
running. Turn the key to the "OFF" position and be sure
the blades have stopped before cleaning. Use a stick to
clear a plugged discharge area. Never use your hand!
•
Stop unit and allow blades to stop before unclogging
chute. Grass collection system components are subject to
wear, damage and deterioration, which could expose
moving parts or allow objects to be thrown. Frequently
check components and replace with manufacturer's
recommended parts, when necessary.
•
Exercise caution when working under the deck as the
mower blades are extremely sharp. Wear gloves and use
extra caution when servicing them.
•
Use only genuine Greenworks Mower parts to ensure that
original standards are maintained.
•
Always disconnect batteries when transporting unit. Keep
unit free of grass clippings, leaves and other debris.
•
Check brake operation frequently. Adjust and service as
required.
•
Maintain or replace safety and instruction labels, as
necessary.
•
Have your ride-on lawn mower serviced by a qualified
repair person using only identical replacement parts. This
will ensure that the safety of the ride-on lawn mower is
maintained.
31
EN
Publicidad
